Iceland Coolers Universal Cooler Lock Bracket

Slip the universal lock bracket into your cooler's tie-down slots and keep it safe wherever you park. Designed for tough marine conditions, this bracket slides securely over the slot to create a strong anchor point without blocking the lid. You can run a cable lock or a standard bike lock through the bracket and attach it to a truck bed, a roof rack, or a tow hitch while still opening your cooler to grab gear.

The rounded edges protect your finish from scuffs, and the heavy-duty construction keeps the bracket steady even when you drag heavy supplies out onto the water or dirt trails.

• Secures without sealing：Anchor the bottom of your cooler to a vehicle or deck while leaving the lid completely free to open and close.
• Grips standard slots：The flat profile is engineered to slip directly into the existing tie-down slots found on most heavy-duty roto-molded coolers.
• Tough marine build：Cut from heavy duty 1/8-inch gauge Marine Grade 5052 aluminum that resists corrosion and handles daily outdoor abuse.
• Protects your finish：Smooth rounded corners prevent unsightly scratches on the cooler plastic, boat fiberglass, or truck lining where the metal rests.
• Fits common cables：The wide loop comfortably accommodates wire locks up to half an inch thick so you do not have to hunt for special hardware.

• Tailgates, campgrounds, or beach days where you need to leave cold drinks safe inside a parked truck or SUV.
• Open bow boats, center consoles, or skiffs where a rolling cooler can shift dangerously while cruising the water.
• Hunting setups, blind sites, or ATV racks that demand an extra safeguard against gear theft or accidental movement.

• Look for the groove：This bracket relies entirely on the cooler's built-in tie-down slots, so verify your model has those channels before buying.
• Pair with the lid hasps：If you want total security, attach the lock bracket to the truck bed first, then engage your cooler's existing front corner hasps to seal the lid.
• Mind the thickness：Always measure the strap on your cable locks beforehand to ensure they are under the half-inch max width specified for the bracket.

• Iceland Cooler owners who want a simple, reliable way to anchor their units to a truck bed liner or trailer.
• Boaters and campers who load large heavy supplies and need peace of mind that their supplies will not roll away.
• Consumers owning competing roto-molded brands who need a universal mounting solution that works outside of proprietary systems.

The bracket accepts cable locks, bike locks, or small padlocks attached to a lanyard. It is explicitly designed to handle wire locks up to one-half inch in diameter.

Rest assured it will not, because the entire design focuses on anchoring the base to a surface while keeping the lid fully accessible for normal loading.

Installing the bracket takes zero tools and seconds to complete. You simply push the metal piece into the cooler's standard tie-down groove.

This bracket physically secures the cooler body to the ground or a vehicle only. If you need to lock the lid shut, you must use your cooler's pre-installed lock hasps situated at the front corners.

The bracket is manufactured from Marine Grade 5052 aluminum. This material offers excellent natural corrosion resistance, making it highly suitable for saltwater environments.

• Product：Universal Cooler Lock Bracket
• Construction Material：Marine Grade 5052 Aluminum
• Sheet Gauge：Heavy Duty 1/8 Inch
• Loop Capacity：Fits wire locks up to half-inch thick
• Muster Method：Slide into cooler tie-down slots
• Edge Finish：Rounded corners to prevent scratching