Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks for the Traeger Ironwood 885, featuring mesh shelves and curved side panels.
Two stainless steel Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks installed inside a Traeger Ironwood 885 for grill expansion.
Packaging box for the Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks for Traeger Ironwood 885, featuring a diagram of the expansion mechanism and a checklist of included components.
Open Traeger Ironwood 885 featuring the Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks with two levels of slide-out metal diamond-mesh cooking racks.
A Traeger Ironwood 885 with a Pimp My Grill® Gen2 Slide-Out Rack System installed, shown with its lid open and both racks pulled out.
Two Pimp My Grill® Gen2 Slide-Out Rack System metal wire racks extend outward from the open lid of a Traeger Ironwood 885 pellet grill.
Traeger Ironwood 885 with an open lid, featuring a Pimp My Grill® Gen2 Slide-Out Rack System with two slide-out rack levels positioned one above the other.
Inside a Traeger Ironwood 885 grill featuring the Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks with two stacked, slide-out metal wire racks.
A Traeger Ironwood 885 featuring a Pimp My Grill® Gen2 Slide-Out Rack System with two expanded metal slide-out racks extended from the main cooking chamber.
A Traeger Ironwood 885 equipped with a Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks, featuring both expanded metal cooking racks pulled outward.
Two metal grill grates with a diamond-pattern mesh, positioned one above the other as a Pimp My Grill® Gen2 Slide-Out Rack System for the Traeger Ironwood 885.
Interior view of a Traeger Ironwood 885 with a Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks installed, showing three sets of metal slide-out rack rails mounted to the side walls for grill expansion.
Three levels of Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks metal brackets installed inside a Traeger Ironwood 885 grill.
Interior of a Traeger Ironwood 885 showing two metal slide-out rack rails from the Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks mounted on the side wall.
Two rectangular metal wire mesh grill racks from the Pimp My Grill® Gen2 Slide-Out Rack System for a Traeger Ironwood 885 stacked vertically as a slide-out rack expansion.
Roll over image to zoom in Click on image to zoom
Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks for the Traeger Ironwood 885, featuring mesh shelves and curved side panels.
Two stainless steel Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks installed inside a Traeger Ironwood 885 for grill expansion.
Packaging box for the Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks for Traeger Ironwood 885, featuring a diagram of the expansion mechanism and a checklist of included components.
Open Traeger Ironwood 885 featuring the Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks with two levels of slide-out metal diamond-mesh cooking racks.
A Traeger Ironwood 885 with a Pimp My Grill® Gen2 Slide-Out Rack System installed, shown with its lid open and both racks pulled out.
Two Pimp My Grill® Gen2 Slide-Out Rack System metal wire racks extend outward from the open lid of a Traeger Ironwood 885 pellet grill.
Traeger Ironwood 885 with an open lid, featuring a Pimp My Grill® Gen2 Slide-Out Rack System with two slide-out rack levels positioned one above the other.
Inside a Traeger Ironwood 885 grill featuring the Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks with two stacked, slide-out metal wire racks.
A Traeger Ironwood 885 featuring a Pimp My Grill® Gen2 Slide-Out Rack System with two expanded metal slide-out racks extended from the main cooking chamber.
A Traeger Ironwood 885 equipped with a Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks, featuring both expanded metal cooking racks pulled outward.
Two metal grill grates with a diamond-pattern mesh, positioned one above the other as a Pimp My Grill® Gen2 Slide-Out Rack System for the Traeger Ironwood 885.
Interior view of a Traeger Ironwood 885 with a Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks installed, showing three sets of metal slide-out rack rails mounted to the side walls for grill expansion.
Three levels of Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks metal brackets installed inside a Traeger Ironwood 885 grill.
Interior of a Traeger Ironwood 885 showing two metal slide-out rack rails from the Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks mounted on the side wall.
Two rectangular metal wire mesh grill racks from the Pimp My Grill® Gen2 Slide-Out Rack System for a Traeger Ironwood 885 stacked vertically as a slide-out rack expansion.

Traeger Ironwood 885 | Pimp My Grill® Gen2 Slide-Out Rack System - 2 Racks

Price:
$304.99 $321.04

Why DDR BBQ Supply?

  • My Image 35+ Years of Smoking Experience
  • My Image Trusted by 17,000+ BBQ Enthusiasts
  • My Image Handpicked for Quality & Performance
Pimp My Grill Gen2 Slide-Out Rack for Traeger Ironwood 885 | Expand Your Cooking Capacity

Your Traeger Ironwood 885 deserves twice the cooking power. The Pimp My Grill Gen2 Slide-Out Rack System adds a second tier to your grill instantly. You gain plenty of room to handle large dinners without stacking meat awkwardly.

This patent-pending mod splits your cooking surface into two distinct heat zones. The lower shelf sits close to the fire pot for intense direct heat and fast charring. The upper rack sits higher up for gentle convection cooking and heavy smoke exposure. You can run completely different cooking styles at the exact same time.

Why You'll Love It
  • Double the Surface Area: Fill the grill with trays of brisket or racks of ribs without overlapping food.
  • Master Multiple Cooks: Bake delicate fish on the top shelf while you sear steaks below.
  • Fragrant Searing: Turn up the temperature on your Ironwood 885 to hit beautiful diamond-shaped grill marks on the top level.
  • Hurt-Free Installation: Mount the sturdy brackets in roughly five minutes without drilling holes or modifying your expensive grill.
  • Pull-Away Convenience: Glide pans outward to flip burgers safely. You avoid bending low into thick clouds of irritant smoke.
Best For
  • Cooking several pounds of ribs or chicken wings at once.
  • Searing thick ribeyes on a pellet grill to lock in natural juices.
  • Roasting whole poultry on the upper rack while smoking sausages below.
  • Hosting crowded weekend gatherings that require huge quantities of cooked food.
Pro Tips
  • Leverage Original Hardware: Pop off your existing side baffle screw and thread the new bracket tightly in its precise spot.
  • Position the Probe Correctly: Place your thermal sensor in the mounting point designed for the upper rack bracket before sliding the shelves in.
  • Breathe Easier While Flipping: Pull the front pan out fully before handling raw meat or finished plates. Keep your head well away from the exhaust gap.
Who's This For?
  • Traeger Ironwood 885 owners who constantly feel short on space during busy holidays.
  • Backyard pitmasters looking to build massive competition-style brisket batches from their living room deck.
  • Kamado users who want an alternative to traditional cast iron grids for versatile zone cooking.
Compatibility Note

Please read this important detail carefully: Pimp My Grill Gen2 accessories are independent aftermarket products. They are not manufactured by, affiliated with, endorsed by, or otherwise related to Traeger Brands LLC.

Does this modification ruin the warranty on my Ironwood 885?

The upgrade requires no cutting or drilling. Since it installs by threading directly into your existing side baffle screw, there is no permanent alteration to the factory welds or shell.

How does the upper rack change the flavor profile of my food?

Higher positioning exposes meat to rising heat waves and abundant wood smoke. You get more even smokiness and slower rendering compared to the rapid direct heat found on the lower shelf.

Will the slide-out mechanism get extremely hot to handle?

The stainless steel racks will naturally absorb heat during operation. You should always utilize oven mitts or thick barbecue gloves when pulling the loaded trays outward.

Is the installation truly beginner-friendly?

Yes. All you need to do is swap one screw and locate the sensor spot. You slide the pre-assembled shelves into place afterward, finishing the whole job in about five minutes.

Can I put frozen foods on these slide-out racks?

Absolutely. The added height allows you to thaw slow-cooked proteins or smoke frozen ribs efficiently without worrying about drips pooling on items below them.

Product Details

  • Model: Pimp My Grill Gen2 Slide-Out Rack System
  • Required Units: 2 Racks per order
  • Grill Fitment: Exclusively made for the Traeger Ironwood 885
  • Mounting Method: Replaces existing side baffle screw; no drilling needed
  • Included Components: Side brackets, thermal sensor mount, slide-out shelf units
Customer Stories
Rated 4.95 across 7,500+ verified reviews.

You May Also Like

Recently Viewed

Texas-Born. BBQ Bred.

With over 35 years of smoking experience, we started DDR BBQ Supply with a simple goal: to help others cook better barbecue. We've spent decades learning what works and what doesn't, and we apply that knowledge to every product we carry. From high-performance grills and smokers to carefully selected rubs, sauces, and tools, everything we offer is something we believe in and use ourselves. We don’t believe in cutting corners or selling gear we wouldn’t rely on during our own backyard cooks and when we compete in BBQ competitions.

Got Questions?

info@ddrbbqsupply.com
Or come visit our store in Garfield, AR.