Iceland Coolers Cutting Board/Divider

The Iceland Coolers Cutting Board/Divider extends your cooler's utility when you need a reliable replacement or additional dividing surface. Every new Iceland cooler ships with one of these inserts for free, so this item covers needs that pop up later. You may need this unit to replace a lost board, swap out a worn piece, or install a fresh divider on a cooler that has seen heavy years on the water. This insert splits your cooler's interior to separate ice from supplies and doubles as a flat workspace for cleaning fillets without leaving the cooler.

Select the version that matches your cooler's capacity to ensure the board slides in flush. A correct fit maintains your temperature control while giving you a designated area to pack gear or process catch.

• Dual-purpose layout acts as a secure divider to lock ice in place and provides a stable cutting board for filleting right inside the cooler.
• Built-in handle lets you lift the board out quickly for washing or to rearrange your cooler's compartments.
• Textured surface adds grip for knives during prep and keeps items stable while you cut or pack.
• Precise sizing prevents gaps that let heat sneak in, preserving ice longer across 20, 45, 75, and 110 qt models.
• Targeted replacement means you get the exact same quality insert your cooler originally came with, now available as a standalone part.

• Filleting on the go brings your workspace into the cooler so mess stays confined away from boat decks or docks.
• Campsite organization separates sleeping bags from kitchen items or locks down gear during travel over rough terrain.
• Large group fishing days allow you to dedicate one section of the cooler to ice and another to processed catch.
• Dockside cleaning stations give you a rigid surface to work on when portable tables are scarce.

• Verify quart rating before ordering. Match your cooler's exterior label to the 20, 45, 75, or 110 qt size. Buying the wrong size breaks the thermal seal.
• Rinse with fresh water immediately after saltwater use. Salt buildup ruins textures faster and attracts corrosion on hardware nearby.
• Test alignment first. Slide the board into the empty cooler before loading heavy items to confirm it seats level and snaps into place.

• Part restockers who lost the original board or need a spare after years of abrasive saltwater use.
• Active anglers who rely on their cooler to process catch daily and grind through the surface texture quickly.
• Multi-cooker families mixing older and newer Iceland Coolers that require matching dividers to keep storage strategies consistent.

This board fits only the designated capacities listed in the title. Confirm your cooler falls into the 20, 45, 75, or 110 qt range. Non-Iceland brands or off-size custom boxes will not accept this divider.

Yes. You must choose one size during checkout. The product serves specific volume cuts, so selecting 20 qt, 45 qt, 75 qt, or 110 qt dictates which physical board you receive.

A well-fitted divider minimizes air movement between sections. Locking ice behind the board keeps cold air trapped around perishables longer than an open bin would.

Wash the surface after every use. Use soap and water to remove oils and residues, then rinse thoroughly to prevent odor buildup. Allow the board to air dry before reinstalling it.

The handle raises slightly above the board plane but does not significantly reduce usable prep area. It provides leverage to lift the heavy, wet board out for cleaning without dropping it.

• Type: Replacement Cutting Board and Interior Divider.
• Features: Textured cutting surface with integrated carrying handle.
• Matching Capacities: 20 qt, 45 qt, 75 qt, and 110 qt (buyer specifies one).
• Intended Use: Food preparation surface and internal compartment separator.
• Inclusion Status: Ships as a single unit; original included with new coolers is not part of this order.